Detailed Product Description

The technical characteristic:
  1. The Valve is carefully designed using the fore-leading principle, and it
     avoids the phenomenon of water-hammer and vibration through the
     structural improvements.
  2. The operation is stable. The smallest operation pressure offset is
     0.05Mpa. 
  3. The valve is inside and outside spurted, and the inside parts are
     completely made from the anti-corrosive material.
  4. The valve engine uses independently designed low power loss anti-
     disturbance electrical machine, the electric control part uses the
     imported monolithic machine and the monolithic machine may
     automatically recognize the valve condition.  It repeatedly starts the
     engine, guarantees the accurate control of the openning and closure
     position of the valve.
  5. Human nature design, simple operation, convenient to use, high security.
Basic Functions
  1. Control functions: may control to open/close the valve at will.
  2. Alert function: show LED alert under low voltage and wrong password
     input.
  3. Prompts function: corresponding LED prompt for openning or closing the
     valve or pressing the key.
  4. Valve body protection function: Each month self-check one time, activate
     the battery, clean up the valve body.
  5. Safety coefficient is high: at most it is allowed to set 16 passwords,
   and may change the passwords as necessary.
The main parameters of the valve:
  1. Nominal pressure:  1.0MPA
  2. Pressure-resistance intensity: 2.0MPA1min
  3. Smallest pressure offset:  0.05MPA
  4. Life span:      DN40-DN100 ≥ 30000times, DN150-DN300 ≥ 10000times
  5. Responding Time:  (Valve open and closure time) <10S
  6. Sealing Property:   No Leakage
  7. Operating Voltage:  3.6V
  8. Electric machine movement Current: ≤ 50mA
  9. static operating current: ≤10μA

Usage Instructions:
     After the coded auto control valve is installed, press the key start
  , all LED lights glisten once, the coded auto control valve starts to
  operate, enters the self-checking condition, then give the prompt for the
  valve condition, simultaneously the password LED is turned on, request for
  the password input. After the password is entered and the "confirmation key
  " is pressed, the password light is turned off which indicates the input
  password is correct, at this time the user may start to do some work such
  as operating the valve, shut down the valve or modify the password.